Haze Zero Instructions

Instructions for Use

1. HAZE ZERØ is a cleaner and anti-haze agent for fingerprints, smudges and theatrical haze. If your lens has other types of heavy contaminants such as grease, mud or pyrotechnic debris you will want to prep the lens first with a conventional multipurpose glass cleaner like Miller Stephenson MS-260.
2. Use HAZE ZERØ only with the special lint free wipes provided as this is important for clear results.
3. In advance locate the side of the theatrical lens that is the cause of the hazing.
4. Spray one pump of HAZE ZERØ to the lens surface about 8 to 12 inches away depending on lens diameter.
5. Wipe clean with a supplied wipe in a circular motion with medium pressure until the light suds 90% disappear. Cover the entire lens or you may see uncleaned areas haze up during the show!
6. Use your breath to exhale on the lens if you like. You should immediately realize that your breath no longer has the ability to fog up the lens! Your breath will blend any final light streaks.
7. For each lens start with a new wipe to avoid contamination. Discard the old wipe as they are biodegradable.
8. After you clean the lens as with any clean surface keep your fingers off the surface to avoid smudges. If smudges accidentally occur repeat steps #5-7 if you like.
9. The more you use HAZE ZERØ on a particular product the better the performance and the longer it tends to last!
10. Avoid contact with eyes. Use in well ventilated area. For safety concerns please see Safety Data Sheet (SDS).